win32.gui ака Скобарь
Guest
|
карточка поддерживается вроде dmesgЦитата |
---|
Linux version 2.6.34 (root@bt) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Wed Jul 21 09:51:09 EDT 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf682000 (usable) BIOS-e820: 00000000bf682000 - 00000000bf6bf000 (reserved) BIOS-e820: 00000000bf6bf000 - 00000000bf754000 (usable) BIOS-e820: 00000000bf754000 - 00000000bf7bf000 (ACPI NVS) BIOS-e820: 00000000bf7bf000 - 00000000bf7e4000 (usable) BIOS-e820: 00000000bf7e4000 - 00000000bf7ff000 (ACPI data) BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable) BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI 2.6 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0xbf800 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-E7FFF uncachable E8000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0FFE00000 mask FFFE00000 write-protect 2 base 080000000 mask FC0000000 write-back 3 base 0BF800000 mask FFF800000 uncachable 4 base 100000000 mask FC0000000 write-back 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01000000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 RAMDISK: 36bc1000 - 37ff0000 Allocated new RAMDISK: 00a8d000 - 01ebb487 Move RAMDISK from 0000000036bc1000 - 0000000037fef486 to 00a8d000 - 01ebb486 ACPI: RSDP 000fe020 00024 (v02 LENOVO) ACPI: XSDT bf7fe120 0007C (v01 LENOVO CB-01 00000001 01000013) ACPI: FACP bf7fb000 000F4 (v04 LENOVO CB-01 00000001 MSFT 01000013) ACPI: DSDT bf7ee000 096A0 (v02 LENOVO CB-01 00000001 MSFT 01000013) ACPI: FACS bf766000 00040 ACPI: DMAR bf7fd000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001) ACPI: ASF! bf7fc000 000A5 (v32 INTEL Calpella 00000001 MSFT 01000013) ACPI: HPET bf7fa000 00038 (v01 LENOVO CB-01 00000001 MSFT 01000013) ACPI: APIC bf7f9000 0008C (v02 INTEL Calpella 00000001 MSFT 01000013) ACPI: MCFG bf7f8000 0003C (v01 LENOVO CB-01 00000001 MSFT 01000013) ACPI: SLIC bf7ed000 00176 (v01 LENOVO CB-01 00000001 MSFT 01000013) ACPI: BOOT bf7ea000 00028 (v01 INTEL Calpella 00000001 MSFT 01000013) ACPI: SSDT bf7e6000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117) ACPI: SSDT bf7e5000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20051117) ACPI: SSDT bf7e4000 0049F (v01 PmRef ApTst 00003000 INTL 20051117) ACPI: Local APIC address 0xfee00000 2176MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000bf800 Movable zone start PFN for each node early_node_map[5] active PFN ranges 0: 0x00000001 -> 0x0000009e 0: 0x00000100 -> 0x000bf682 0: 0x000bf6bf -> 0x000bf754 0: 0x000bf7bf -> 0x000bf7e4 0: 0x000bf7ff -> 0x000bf800 On node 0 totalpages: 784090 free_area_init_node: node 0, pgdat c0995040, node_mem_map c1ebd020 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3965 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 4353 pages used for memmap HighMem zone: 552510 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 early_res array is doubled to 64 at [8000 - 87ff] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 12 pages/cpu @c3800000 s28372 r0 d20780 u524288 early_res array is doubled to 128 at [8800 - 97ff] pcpu-alloc: s28372 r0 d20780 u524288 alloc=1*4194304 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777961 Kernel command line: BOOT=casper boot=casper nopersistent rw quiet vga=0x317 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Subtract (60 early reservations) #1 [0000001000 - 0000002000] EX TRAMPOLINE #2 [0000100000 - 0000a87444] TEXT DATA BSS #3 [000009e000 - 0000100000] BIOS reserved #4 [0000a88000 - 0000a8c2ce] BRK #5 [0000002000 - 0000003000] TRAMPOLINE #6 [0000003000 - 0000007000] ACPI WAKEUP #7 [0000007000 - 0000008000] PGTABLE #8 [0000a8d000 - 0001ebc000] NEW RAMDISK #9 [0001ebc000 - 0001ebd000] BOOTMEM #10 [0001ebd000 - 00036ad000] BOOTMEM #11 [00036ad000 - 00036ad004] BOOTMEM #12 [00036ad040 - 00036ad100] BOOTMEM #13 [00036ad100 - 00036ad154] BOOTMEM #14 [00036ad180 - 00036b0180] BOOTMEM #15 [00036b0180 - 00036b0250] BOOTMEM #16 [00036b0280 - 00036bc280] BOOTMEM #17 [00036bc280 - 00036bc2a5] BOOTMEM #18 [00036bc2c0 - 00036bc2e7] BOOTMEM #19 [00036bc300 - 00036bc54c] BOOTMEM #20 [00036bc580 - 00036bc5c0] BOOTMEM #21 [00036bc5c0 - 00036bc600] BOOTMEM #22 [00036bc600 - 00036bc640] BOOTMEM #23 [00036bc640 - 00036bc680] BOOTMEM #24 [00036bc680 - 00036bc6c0] BOOTMEM #25 [00036bc6c0 - 00036bc700] BOOTMEM #26 [00036bc700 - 00036bc740] BOOTMEM #27 [00036bc740 - 00036bc780] BOOTMEM #28 [00036bc780 - 00036bc7c0] BOOTMEM #29 [00036bc7c0 - 00036bc800] BOOTMEM #30 [00036bc800 - 00036bc840] BOOTMEM #31 [00036bc840 - 00036bc880] BOOTMEM #32 [00036bc880 - 00036bc8c0] BOOTMEM #33 [00036bc8c0 - 00036bc900] BOOTMEM #34 [00036bc900 - 00036bc940] BOOTMEM #35 [00036bc940 - 00036bc980] BOOTMEM #36 [00036bc980 - 00036bc9c0] BOOTMEM #37 [00036bc9c0 - 00036bca00] BOOTMEM #38 [00036bca00 - 00036bca40] BOOTMEM #39 [00036bca40 - 00036bca80] BOOTMEM #40 [00036bca80 - 00036bca90] BOOTMEM #41 [00036bcac0 - 00036bcaf8] BOOTMEM #42 [00036bcb00 - 00036bcb38] BOOTMEM #43 [0003800000 - 000380c000] BOOTMEM #44 [0003880000 - 000388c000] BOOTMEM #45 [0003900000 - 000390c000] BOOTMEM #46 [0003980000 - 000398c000] BOOTMEM #47 [0003a00000 - 0003a0c000] BOOTMEM #48 [0003a80000 - 0003a8c000] BOOTMEM #49 [0003b00000 - 0003b0c000] BOOTMEM #50 [0003b80000 - 0003b8c000] BOOTMEM #51 [00036beb40 - 00036beb44] BOOTMEM #52 [00036beb80 - 00036beb84] BOOTMEM #53 [00036bebc0 - 00036bebe0] BOOTMEM #54 [00036bec00 - 00036bec20] BOOTMEM #55 [00036bec40 - 00036becd8] BOOTMEM #56 [00036bed00 - 00036bed38] BOOTMEM #57 [00036bed40 - 00036c2d40] BOOTMEM #58 [00036c2d40 - 0003742d40] BOOTMEM #59 [0003742d40 - 0003782d40] BOOTMEM Initializing HighMem for node 0 (000377fe:000bf800) Memory: 3080132k/3137536k available (6554k kernel code, 56228k reserved, 2260k data, 484k init, 2227452k highmem) virtual kernel memory layout: fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc099c000 - 0xc0a15000 ( 484 kB) .data : 0xc0766a10 - 0xc099bd44 (2260 kB) .text : 0xc0100000 - 0xc0766a10 (6554 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:512 Extended CMOS year: 2000 Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1596.195 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.40 BogoMIPS (lpj=5320650) Security Framework initialized Mount-cache hash table entries: 512 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. Performance Events: Nehalem/Corei7 events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f Checking 'hlt' instruction... OK. ACPI: Core revision 20100121 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel® Core i7 CPU Q 720 @ 1.60GHz stepping 05 Booting Node 0, Processors #1 Initializing CPU#1 #2 Initializing CPU#2 #3 Initializing CPU#3 #4 Initializing CPU#4 #5 Initializing CPU#5 #6 Initializing CPU#6 #7 Ok. Initializing CPU#7 Brought up 8 CPUs Total of 8 processors activated (25548.99 BogoMIPS). xor: automatically using best checksumming function: pIII_sse pIII_sse : 6567.600 MB/sec xor: using function: pIII_sse (6567.600 MB/sec) NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 2 blocks of module-level executable AML code ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT bf691a98 002DA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT bf690618 005CD (v01 PmRef Cpu0Cst 00003001 INTL 20051117) ACPI: SSDT bf691718 00303 (v01 PmRef ApIst 00003000 INTL 20051117) ACPI: SSDT bf68fd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:1a.0: reg 10: [mem 0xdd105c00-0xdd105fff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xdd100000-0xdd103fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 10: [mem 0xdd105800-0xdd105bff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10: [io 0x7048-0x704f] pci 0000:00:1f.2: reg 14: [io 0x7054-0x7057] pci 0000:00:1f.2: reg 18: [io 0x7040-0x7047] pci 0000:00:1f.2: reg 1c: [io 0x7050-0x7053] pci 0000:00:1f.2: reg 20: [io 0x7020-0x703f] pci 0000:00:1f.2: reg 24: [mem 0xdd105000-0xdd1057ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xdd106000-0xdd1060ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x7000-0x701f] pci 0000:00:1f.6: reg 10: [mem 0xdd104000-0xdd104fff 64bit] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] pci 0000:01:00.0: reg 24: [io 0x6000-0x607f] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] pci 0000:01:00.1: reg 10: [mem 0xd3000000-0xd3003fff] pci 0000:00:03.0: PCI bridge to [bus 01-01] pci 0000:00:03.0: bridge window [io 0x6000-0x6fff] pci 0000:00:03.0: bridge window [mem 0xd2000000-0xd30fffff] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-05] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.0: bridge window [mem 0xdc100000-0xdd0fffff] pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd40fffff 64bit pref] pci 0000:06:00.0: reg 10: [mem 0xdb100000-0xdb101fff 64bit] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 06-06] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xdb100000-0xdc0fffff] pci 0000:00:1c.1: bridge window [mem 0xd4100000-0xd50fffff 64bit pref] pci 0000:07:00.0: reg 10: [mem 0xda100000-0xda10ffff 64bit] pci 0000:07:00.0: PME# supported from D3hot D3cold pci 0000:07:00.0: PME# disabled pci 0000:00:1c.2: PCI bridge to [bus 07-07] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xda100000-0xdb0fffff] pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd60fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 08-08] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.3: bridge window [mem 0xd9100000-0xda0fffff] pci 0000:00:1c.3: bridge window [mem 0xd6100000-0xd70fffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 09-09] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.5: bridge window [mem 0xd8100000-0xd90fffff] pci 0000:00:1c.5: bridge window [mem 0xd7100000-0xd80fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT] \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 19 1f ACPI: PCI Root Bridge [CPBG] (0000:ff) pci_bus 0000:ff: on NUMA node 0 ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int32x1 658 MB/s raid6: int32x2 742 MB/s raid6: int32x4 512 MB/s raid6: int32x8 486 MB/s raid6: mmxx1 2183 MB/s raid6: mmxx2 2571 MB/s raid6: sse1x1 1981 MB/s raid6: sse1x2 2380 MB/s raid6: sse2x1 3946 MB/s raid6: sse2x2 4710 MB/s raid6: using algorithm sse2x2 (4710 MB/s) PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009e000 - 000000000009ffff reserve RAM buffer: 00000000bf682000 - 00000000bfffffff reserve RAM buffer: 00000000bf754000 - 00000000bfffffff reserve RAM buffer: 00000000bf7e4000 - 00000000bfffffff reserve RAM buffer: 00000000bf800000 - 00000000bfffffff HPET: 8 timers in total, 5 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter hpet: hpet2 irq 24 for MSI hpet: hpet3 irq 25 for MSI hpet: hpet4 irq 26 for MSI hpet: hpet5 irq 27 for MSI hpet: hpet6 irq 28 for MSI Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 7 [io 0x1000-0x1fff] pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:05: [io 0x0680-0x069f] has been reserved system 00:05: [io 0x0800-0x080f] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0400-0x047f] has been reserved system 00:05: [io 0x0500-0x057f] has been reserved system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:09: [mem 0xfed1b000-0xfed1bfff] has been reserved system 00:09: [mem 0xe0000000-0xefffffff] has been reserved system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:09: [mem 0xff000000-0xffffffff] could not be reserved system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:09: [mem 0xdd200000-0xdd200fff] has been reserved pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref] pci 0000:00:03.0: PCI bridge to [bus 01-01] pci 0000:00:03.0: bridge window [io 0x6000-0x6fff] pci 0000:00:03.0: bridge window [mem 0xd2000000-0xd30fffff] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-05] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.0: bridge window [mem 0xdc100000-0xdd0fffff] pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd40fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 06-06] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xdb100000-0xdc0fffff] pci 0000:00:1c.1: bridge window [mem 0xd4100000-0xd50fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 07-07] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xda100000-0xdb0fffff] pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd60fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 08-08] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.3: bridge window [mem 0xd9100000-0xda0fffff] pci 0000:00:1c.3: bridge window [mem 0xd6100000-0xd70fffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 09-09] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.5: bridge window [mem 0xd8100000-0xd90fffff] pci 0000:00:1c.5: bridge window [mem 0xd7100000-0xd80fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] pci_bus 0000:02: resource 1 [mem 0xdc100000-0xdd0fffff] pci_bus 0000:02: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] pci_bus 0000:06: resource 1 [mem 0xdb100000-0xdc0fffff] pci_bus 0000:06: resource 2 [mem 0xd4100000-0xd50fffff 64bit pref] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff] pci_bus 0000:07: resource 1 [mem 0xda100000-0xdb0fffff] pci_bus 0000:07: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff] pci_bus 0000:08: resource 1 [mem 0xd9100000-0xda0fffff] pci_bus 0000:08: resource 2 [mem 0xd6100000-0xd70fffff 64bit pref] pci_bus 0000:09: resource 0 [io 0x1000-0x1fff] pci_bus 0000:09: resource 1 [mem 0xd8100000-0xd90fffff] pci_bus 0000:09: resource 2 [mem 0xd7100000-0xd80fffff 64bit pref] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 20668k freed Simple Boot Flag at 0x44 set to 0x1 apm: BIOS not found. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NTFS driver 2.1.29 [Flags: R/O]. msgmni has been set to 1705 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:03.0: setting latency timer to 64 pcieport 0000:00:03.0: irq 29 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 31 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.2: irq 32 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 pcieport 0000:00:1c.3: irq 33 for MSI/MSI-X pcieport 0000:00:1c.5: setting latency timer to 64 pcieport 0000:00:1c.5: irq 34 for MSI/MSI-X \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f aer 0000:00:03.0:pcie02: AER service couldn't init device: _OSC failed pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xd1000000, mapped to 0xf8080000, using 6144k, total 14336k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:ca60 vesafb: pmi: set display start = c00ccac3, set palette = c00ccb1e vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... silentjpeg size 128150 bytes, ...found (1024x768, 128042 bytes, v3). Console: switching to colour frame buffer device 107x34 fb0: VESA VGA frame buffer device ACPI: AC Adapter [ACAD] (on-line) input: Power Button as /class/input/input0 ACPI: Power Button [PWRB] input: Sleep Button as /class/input/input1 ACPI: Sleep Button [SLPB] input: Lid Switch as /class/input/input2 ACPI: Lid Switch [LID0] input: Power Button as /class/input/input3 ACPI: Power Button [PWRF] Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state ACPI: Invalid active0 threshold thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (60 C) isapnp: Scanning for PnP cards... ACPI: EC: GPE storm detected, transactions will use polling mode isapnp: No Plug & Play device found ACPI: Battery Slot [BAT1] (battery present) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled floppy0: no floppy controllers found brd: module loaded loop: module loaded Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.20) Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 ide-cd driver 5.00 Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Adaptec aacraid driver 1.1-5[24702]-ms aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded scsi: <fdomain> Detection failed (no card) sym53c416.c: Version 1.0.0-ac qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options QLogic Fibre Channel HBA Driver: 8.03.02-k2 iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver Emulex LightPulse Fibre Channel SCSI driver 8.3.10 Copyright© 2004-2009 Emulex. All rights reserved. Failed initialization of WD-7000 SCSI card! DC390: clustering now enabled by default. If you get problems load with "disable_clustering=1" and report to maintainers megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009 GDT-HA: Storage RAID Controller Driver. Version: 3.05 3ware Storage Controller device driver for Linux v1.26.02.002. 3ware 9000 Storage Controller device driver for Linux v2.26.02.013. nsp32: loading... ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010) RocketRAID 3xxx/4xxx Controller driver v1.6 (090910) st: Version 20081215, fixed bufsize 32768, s/g segs 256 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 35 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci scsi6 : ahci scsi7 : ahci ata1: SATA max UDMA/133 abar m2048@0xdd105000 port 0xdd105100 irq 35 ata2: SATA max UDMA/133 abar m2048@0xdd105000 port 0xdd105180 irq 35 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xdd105000 port 0xdd105300 irq 35 ata6: DUMMY Intel® PRO/1000 Network Driver - version 7.3.21-k5-NAPI Copyright © 1999-2006 Intel Corporation. Atheros® L2 Ethernet Driver - version 2.2.3 Copyright © 2007 Atheros Corporation. jme: JMicron JMC2XX ethernet driver version 1.0.6 pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de e100: Intel® PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright© 1999-2006 Intel Corporation tg3.c:v3.108 (February 17, 2010) tg3 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 tg3 0000:07:00.0: setting latency timer to 64 tg3 mdio bus: probed tg3 0000:07:00.0: (unregistered net_device): No PHY devices tg3 0000:07:00.0: (unregistered net_device): Problem fetching invariants of chip, aborting tg3 0000:07:00.0: PCI INT A disabled I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 Fusion MPT base driver 3.04.14 Copyright © 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.14 Fusion MPT FC Host driver 3.04.14 Fusion MPT SAS Host driver 3.04.14 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdd105c00 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdd105800 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected 116x: driver isp116x-hcd, 03 Nov 2005 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver sl811: driver sl811-hcd, 19 May 2005 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode input: AT Translated Set 2 keyboard as /class/input/input4 ata5: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: ST9500325AS, 0010LVM1, max UDMA/100 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 usb 1-1: new high speed USB device using ehci_hcd and address 2 ata2.00: ATAPI: Optiarc DVD RW AD-7580S, F820, max UDMA/100, ATAPI AN scsi 2:0:0:0: Direct-Access ATA ST9500325AS 0010 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < ata2.00: configured for UDMA/100 scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7580S F820 PQ: 0 ANSI: 5 sda5sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sda6 > sd 2:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 484k freed hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected usb 2-1: new high speed USB device using ehci_hcd and address 2 fuse init (API version 7.13) hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected usb 1-1.1: new high speed USB device using ehci_hcd and address 3 EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240) usb 1-1.4: new full speed USB device using ehci_hcd and address 4 usb 2-1.3: new high speed USB device using ehci_hcd and address 3 sd 2:0:0:0: Attached scsi generic sg0 type 0 sr 3:0:0:0: Attached scsi generic sg1 type 5 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A squashfs: version 4.0 (2009/01/31) Phillip Lougher aufs 2-standalone.tree-34-20100607 udevd version 124 started shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 iTCO_vendor_support: vendor-support=0 usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a PM55 TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems acpi device:3d: registered as cooling_device8 input: Video Bus as /class/input/input5 ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) cfg80211: Calling CRDA to update world regulatory domain Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000 input: SynPS/2 Synaptics TouchPad as /class/input/input6 iwlagn: Intel® Wireless WiFi Link AGN driver for Linux, in-tree:d iwlagn: Copyright© 2003-2010 Intel Corporation iwlagn 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:06:00.0: setting latency timer to 64 iwlagn 0000:06:00.0: Detected Intel Wireless WiFi Link 5150ABG REV=0x44 i2400m_usb 1-1.1:1.0: device reboot: error 16 while waiting for reboot barker - rebooting iwlagn 0000:06:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:06:00.0: irq 36 for MSI/MSI-X iwlagn 0000:06:00.0: firmware: requesting iwlwifi-5150-2.ucode i2400m_usb 1-1.1:1.0: WiMAX interface wmx0 (00:1d:e1:06:cd:77) ready i2400m_usb 1-1.1:1.0: firmware: requesting i2400m-fw-usb-1.4.sbcf i2400m_usb 1-1.1:1.0: fw i2400m-fw-usb-1.4.sbcf: cannot load file: -2 i2400m_usb 1-1.1:1.0: Could not find a usable firmware image i2400m_usb 1-1.1:1.0: cannot bootstrap device: -2 i2400m_usb 1-1.1:1.0: cannot setup device: -2 i2400m_usb: probe of 1-1.1:1.0 failed with error -2 usbcore: registered new interface driver i2400m_usb iwlagn 0000:06:00.0: loaded firmware version 8.24.2.2 phy0: Selected rate control algorithm 'iwl-agn-rs' HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 37 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: ALC272: BIOS auto-probing. HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda_intel: Disable MSI for Nvidia chipset HDA Intel 0000:01:00.1: setting latency timer to 64 lp: driver loaded but no devices found Adding 3905532k swap on /dev/sda5. Priority:-1 extents:1 across:3905532k ip_tables: © 2000-2006 Netfilter Core Team mtrr: base(0xd1000000) is not aligned on a size(0xe00000) boundary root@bt:~# dmesg |
Изменено: win32.gui ака Скобарь - 19.10.2010 13:11:13
|