Linux version 2.6.34 (root@bt) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Wed Jul 21 09:51:09 EDT 2010
Atom PSE erratum detected, BIOS microcode update recommended
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f5b2000 (usable)
BIOS-e820: 000000001f5b2000 - 000000001f5d5000 (ACPI NVS)
BIOS-e820: 000000001f5d5000 - 000000001f5e6000 (reserved)
BIOS-e820: 000000001f5e6000 - 000000001f5e9000 (ACPI NVS)
BIOS-e820: 000000001f5e9000 - 000000001f605000 (reserved)
BIOS-e820: 000000001f605000 - 000000001f606000 (ACPI NVS)
BIOS-e820: 000000001f606000 - 000000001f608000 (reserved)
BIOS-e820: 000000001f608000 - 000000001f611000 (ACPI data)
BIOS-e820: 000000001f611000 - 000000001f617000 (ACPI NVS)
BIOS-e820: 000000001f617000 - 000000001f700000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.4 present.
Initializing HighMem for node 0 (00000000:00000000)
Memory: 477788k/513736k available (6554k kernel code, 35492k reserved, 2260k data, 484k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
spurious 8259A interrupt: IRQ7.
Fast TSC calibration using PIT
Detected 1599.944 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3201.21 BogoMIPS (lpj=5333146)
Security Framework initialized
Mount-cache hash table entries: 512
Atom PSE erratum detected, BIOS microcode update recommended
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20100121
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Atom PSE erratum detected, BIOS microcode update recommended
Brought up 2 CPUs
Total of 2 processors activated (6402.23 BogoMIPS).
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 4966.800 MB/sec
xor: using function: pIII_sse (4966.800 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000fffff]
pci_root PNP0A08:00: host bridge window [mem 0x20000000-0xffefffff]
pci 0000:00:02.0: reg 10: [mem 0xdfe80000-0xdfefffff]
pci 0000:00:02.0: reg 14: [io 0xd0f0-0xd0f7]
pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xdff00000-0xdff3ffff]
pci 0000:00:02.1: reg 10: [mem 0xdfe00000-0xdfe7ffff]
pci 0000:00:1b.0: reg 10: [mem 0xffe00000-0xffe03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xd080-0xd09f]
pci 0000:00:1d.1: reg 20: [io 0xd060-0xd07f]
pci 0000:00:1d.2: reg 20: [io 0xd040-0xd05f]
pci 0000:00:1d.3: reg 20: [io 0xd020-0xd03f]
pci 0000:00:1d.7: reg 10: [mem 0xdff40000-0xdff403ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed03000
pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 004c (mask 0007)
pci 0000:00:1f.2: reg 10: [io 0xd0e0-0xd0e7]
pci 0000:00:1f.2: reg 14: [io 0xd0d0-0xd0d3]
pci 0000:00:1f.2: reg 18: [io 0xd0c0-0xd0c7]
pci 0000:00:1f.2: reg 1c: [io 0xd0b0-0xd0b3]
pci 0000:00:1f.2: reg 20: [io 0xd0a0-0xd0af]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:01:00.0: reg 18: [mem 0xffd10000-0xffd10fff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0xffd00000-0xffd0ffff 64bit pref]
pci 0000:01:00.0: reg 30: [mem 0xdfd00000-0xdfd0ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1c.0: bridge window [mem 0xffd00000-0xffdfffff 64bit pref]
pci 0000:02:00.0: reg 10: [io 0xb000-0xb0ff]
pci 0000:02:00.0: reg 14: [mem 0xdfc00000-0xdfc03fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000fffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x20000000-0xffefffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1 166 MB/s
raid6: int32x2 241 MB/s
raid6: int32x4 264 MB/s
raid6: int32x8 296 MB/s
raid6: mmxx1 353 MB/s
raid6: mmxx2 708 MB/s
raid6: sse1x1 298 MB/s
raid6: sse1x2 546 MB/s
raid6: sse2x1 597 MB/s
raid6: sse2x2 1085 MB/s
raid6: using algorithm sse2x2 (1085 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 000000001f5b2000 - 000000001fffffff
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed03000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x0400-0x047f] has been reserved
system 00:09: [io 0x1180-0x119f] has been reserved
system 00:09: [io 0x0500-0x053f] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xfed20000-0xfed23fff] has been reserved
system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:09: [mem 0xfc800400-0xfc800fff] has been reserved
pci 0000:00:1c.1: BAR 9: assigned [mem 0x20000000-0x201fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1c.0: bridge window [mem 0xffd00000-0xffdfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:1c.1: bridge window [mem 0x20000000-0x201fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000fffff]
pci_bus 0000:00: resource 8 [mem 0x20000000-0xffefffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:01: resource 2 [mem 0xffd00000-0xffdfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xdfc00000-0xdfcfffff]
pci_bus 0000:02: resource 2 [mem 0x20000000-0x201fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000fffff]
pci_bus 0000:03: resource 8 [mem 0x20000000-0xffefffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20668k freed
apm: BIOS not found.
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 973
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
MSI Wind U-100 detected: will not use MSI for PCIe PME signaling
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xc0000000, mapped to 0xdfe00000, using 7500k, total 7872k
vesafb: mode is 800x600x32, linelength=3200, pages=3
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: VESA VGA (fb0) is primary device
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /class/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /class/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /class/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /class/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (55 C)
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT1] (battery absent)
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[24702]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
QLogic Fibre Channel HBA Driver: 8.03.02-k2
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.10
Copyright(c) 2004-2009 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.013.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
st: Version 20081215, fixed bufsize 32768, s/g segs 256
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd0a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd0a8 irq 15
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.6
pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:01:00.0: setting latency timer to 64
r8169 0000:01:00.0: irq 26 for MSI/MSI-X
r8169 0000:01:00.0: eth0: RTL8102e at 0xdfdf0000, 00:21:85:47:16:31, XID 14a00000 IRQ 26
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.14
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.14
Fusion MPT FC Host driver 3.04.14
Fusion MPT SAS Host driver 3.04.14
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff40000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d080
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d060
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d040
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d020
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP detection disabled
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input4
usb 1-1: new high speed USB device using ehci_hcd and address 2
scsi4 : usb-storage 1-1:1.0
ata1.00: ATA-7: WDC WD800BEVS-22RST0, 04.01G04, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
usb 1-2: new high speed USB device using ehci_hcd and address 3
ata1.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD800BEVS-22 04.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 484k freed
scsi9 : usb-storage 1-2:1.4
scsi10 : usb-storage 1-2:1.5
usb 1-6: new high speed USB device using ehci_hcd and address 4
fuse init (API version 7.13)
scsi11 : usb-storage 1-6:1.0
scsi 4:0:0:0: CD-ROM TS8XDVDR Transcend 1.66 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 47x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
NTFS volume version 3.1.
scsi 10:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
scsi 9:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
sd 10:0:0:0: [sdb] Attached SCSI removable disk
sr1: scsi-1 drive
sr 9:0:0:0: Attached scsi CD-ROM sr1
scsi 11:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 11:0:0:0: [sdc] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
sd 10:0:0:0: Attached scsi generic sg2 type 0
sr 9:0:0:0: Attached scsi generic sg3 type 5
sd 11:0:0:0: Attached scsi generic sg4 type 0
NTFS volume version 3.1.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs 2-standalone.tree-34-20100607
atkbd serio0: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e076 <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e076 <keycode>' to make it known.
udevd version 124 started
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
option 1-2:1.0: GSM modem (1-port) converter detected
usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
option 1-2:1.1: GSM modem (1-port) converter detected
usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
option 1-2:1.2: GSM modem (1-port) converter detected
usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
option 1-2:1.3: GSM modem (1-port) converter detected
usb 1-2: GSM modem (1-port) converter now attached to ttyUSB3
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input5
atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
acpi device:1a: registered as cooling_device2
input: Video Bus as /class/input/input6
ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: irq 27 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
hda_codec: ALC1200: BIOS auto-probing.
ACPI: WMI: Mapper loaded
lp: driver loaded but no devices found
ip_tables: (C) 2000-2006 Netfilter Core Team
atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
usbcore: registered new interface driver rtl8187
ifconfig: page allocation failure. order:3, mode:0x4020
Pid: 7908, comm: ifconfig Not tainted 2.6.34 #1
active_anon:8438 inactive_anon:8429 isolated_anon:0
active_file:14238 inactive_file:67582 isolated_file:0
unevictable:0 dirty:0 writeback:0 unstable:0
free:770 slab_reclaimable:5715 slab_unreclaimable:2132
mapped:7249 shmem:3636 pagetables:455 bounce:0
DMA free:2024kB min:88kB low:108kB high:132kB active_anon:0kB inactive_anon:60kB active_file:128kB inactive_file:3596kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15800kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:224kB slab_unreclaimable:92kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:15 all_unreclaimable? no
lowmem_reserve[]: 0 481 481 481
Normal free:1056kB min:2760kB low:3448kB high:4140kB active_anon:33752kB inactive_anon:33656kB active_file:56824kB inactive_file:266732kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:493464kB mlocked:0kB dirty:0kB writeback:0kB mapped:28996kB shmem:14544kB slab_reclaimable:22636kB slab_unreclaimable:8436kB kernel_stack:1464kB pagetables:1820kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
DMA: 160*4kB 161*8kB 6*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2024kB
Normal: 60*4kB 11*8kB 1*16kB 0*32kB 1*64kB 1*128kB 0*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 1048kB
85460 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap = 0kB
Total swap = 0kB
128418 pages RAM
0 pages HighMem
3684 pages reserved
98072 pages shared
58771 pages non-shared
r8169 0000:01:00.0: eth0: link down
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
|
